I have been able to set my Arnova 10b G2 into flashing mode by First connecting the usb kabel to my pc and tablet.

If you dont get this screen but an error message, you will need to go back to the driver directory selection and try another architecture (see Step F.). On our system the full selected path is the following: C:UsersarctabletDesktopRockchipBatchToolv1.5RockusbDriveramd64win7. Rockchip Batch Tool Blue Square Full Selected Path On our computer, we are using a Windows 7 64 bits machine, so we select amd64win7 directory and we press the OK button. Rockchip Batch Tool Blue Square Windows 7 64 Bits Reset your tablet, you should then be able to install the custom drivers.įrom there, locate the directory corresponding to your system architecture as you noted in the earlier Step B. Note, the file can be named differently, it will be flashed anyway. Select the update.img file that you have prepared in the first steps. Select the firmware file to flash using the button in the top right area of the application.

It will then install the driver for RK29 Device The setup wizard will display this screen when the driver installing is complete. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package, then select the right folder that corresponds to your computer platform and operating systems. Keep the paperclip pushing the reset and the Volume button pressed for about 15 seconds. Rockchip Batch Tool Blue Square Driver For The

Rockchip Batch Tool Blue Square Driver For The.

Rockchip Batch Tool Blue Square Windows 7 64 Bits.

Rockchip Batch Tool Blue Square Full Selected Path.

Rockchip batch tool blue square